DJI Phantom 2 Vision+ ESC Removal

英語

日本語

手順 2を翻訳中

手順2

Desolder the ESC

Desolder the ESC ground and voltage wires from the mainboard.
Be careful not to melt the plastic case bottom shell with your soldering iron or damage any electronic components.
You can remove in-the-way cables by unplugging them and moving them aside. This will protect them from the warning above.
Be sure to plug these cables back in before reassembling your Phantom 2.

クリエイティブコモンズのオープンソース著作権のもと、あなたの投稿は著作権の対象となります。