メインコンテンツにスキップ

iPhone 6 イヤホンスピーカーの交換

注意:あなたはさきほど閲覧しているガイドの前提となるページを編集しています。あなたが行った変更は、この手順を含むガイド全体に影響を与えます。

英語
日本語

手順 4を翻訳中

手順4
iPhone 6 Earpiece Speaker Replacement: 手順 0、 2の画像 1 iPhone 6 Earpiece Speaker Replacement: 手順 0、 2の画像 2
  • Holding the front-facing camera out of the way, remove the earpiece speaker from the front panel.

  • Try not to touch any of the contacts on the speaker or the cable—skin oils can damage them and interrupt the connection. If you touch them by mistake, clean them with a little isopropyl alcohol and give them a few moments to air dry.

正面カメラを固定しながら、イヤホンスピーカーをフロントパネルから取り外します。

スピーカーやケーブルとその表面に付けられている接続面に手が当たらないよう努力してください。油脂がこれらのパーツにダメージを与えたり、接続に支障をきたす場合があります。もし誤ってふれてしまった場合、イソプロピルアルコールを用いてきれいにし、空気乾燥させてください。

クリエイティブコモンズのオープンソース著作権のもと、あなたの投稿は著作権の対象となります