メインコンテンツにスキップ

iPhone 6の電源ボタンケーブルアセンブリの交換

注意:あなたはさきほど閲覧しているガイドの前提となるページを編集しています。あなたが行った変更は、この手順を含むガイド全体に影響を与えます。

英語
日本語

手順 17を翻訳中

手順17
iPhone 6 Power Button Cable Assembly Replacement: 手順 0、 3の画像 1 iPhone 6 Power Button Cable Assembly Replacement: 手順 0、 3の画像 2 iPhone 6 Power Button Cable Assembly Replacement: 手順 0、 3の画像 3
  • Use the point of a spudger to gently push the flash and microphone modules up out of their respective holes in the rear case.

  • If you encounter significant adhesive, use tweezers to peel the components up from the rear case.

スパッジャーの先端を使って背面ケースのそれぞれの穴からフラッシュとマイクモジュールを丁寧に押し上げます。

もし強力な接着剤が付けられている場合はピンセットを使って背面ケースからコンポーネントを剥がしていきます。

クリエイティブコモンズのオープンソース著作権のもと、あなたの投稿は著作権の対象となります