メインコンテンツにスキップ

iPhone 6 Power Button Cable Assembly Replacement

注意:あなたは必要条件ガイドを編集しています。あなたが行なう変更は、この手順を含む全ての2個のガイドに反映されます。

英語
オランダ語

手順 3を翻訳中

手順3
iPhone 6 Power Button Cable Assembly Replacement: 手順 0、 3の画像 1 iPhone 6 Power Button Cable Assembly Replacement: 手順 0、 3の画像 2 iPhone 6 Power Button Cable Assembly Replacement: 手順 0、 3の画像 3
  • When you feel increased resistance from the adhesive strip, pull it gently around the lower right corner of the battery.

  • Continue pulling the adhesive tab upward and away from the right edge of the battery, allowing it to slowly slide out from between the battery and the rear case, until the strip comes free from the iPhone.

  • Don't allow the adhesive strip to snag on the battery connector, or it may tear or break off.

ここに翻訳を挿入する

ここに翻訳を挿入する

ここに翻訳を挿入する

クリエイティブコモンズのオープンソース著作権のもと、あなたの投稿は著作権の対象となります