メインコンテンツにスキップ

iPhone 6 Plusのアンテナアセンブリの交換

注意:あなたは必要条件ガイドを編集しています。あなたが行なう変更は、この手順を含む全ての2個のガイドに反映されます。

英語
日本語

手順 5を翻訳中

手順5
iPhone 6 Plus Antenna Assembly Replacement: 手順 0、 2の画像 1 iPhone 6 Plus Antenna Assembly Replacement: 手順 0、 2の画像 2
  • The two connectors may be coupled by a single adhesive tab. If this is the case, then they may detach as a pair.

  • Disconnect the power button cable and audio control cable connectors from their respective sockets on the logic board.

2つのコネクターは1本の接着タブで留めれている場合があります。その場合は2つに引き離します。

ロジックボードに付けられたそれぞれのソケットから音量コントロールケーブルのコネクターと電源ボタンケーブルの接続を外します。

クリエイティブコモンズのオープンソース著作権のもと、あなたの投稿は著作権の対象となります