メインコンテンツにスキップ

Reemplazo del módulo del panel frontal del iPhone 6 Plus

注意:あなたは必要条件ガイドを編集しています。あなたが行なう変更は、この手順を含む全ての18個のガイドに反映されます。

英語
スペイン語

手順 1を翻訳中

手順1
iPhone 6 Plus Front Panel Assembly Replacement: 手順 0、 1の画像 1
  • Use a single suction cup to lift the front panel:

  • Press a suction cup onto the screen, just above the home button.

  • Be sure the cup is pressed securely onto the screen to get a tight seal.

  • If your display is badly cracked, covering it with a layer of clear packing tape may allow the suction cup to adhere. Alternatively, very strong tape may be used instead of the suction cup. If all else fails, you can superglue the suction cup to the broken screen.

Usa una ventosa para separar el panel frontal:

Presiona la ventosa sobre la pantalla, justo arriba del botón de inicio.

Asegúrate de que la ventosa está presionada firmemente sobre la pantalla para tener un sellado hermético.

Si tu pantalla esta muy dañada, cubrirla con una capa de cinta transparente pueda que permita a la ventosa adherirse. Alternativamente, una cinta muy fuerte puede ser usada en lugar de la ventosa. Si todo lo demás falla, puedes pegar la ventosa a la pantalla rota.

クリエイティブコモンズのオープンソース著作権のもと、あなたの投稿は著作権の対象となります