手順 4を翻訳中
手順4
Install the new LCD
-
Get the new LCD. Inspect it for damage before installation.
-
Reconnect the LVDS cable to the new LCD. Push the tape down after it is plugged in. Note: The tape on the cable will be worn. Replace the tape if you are concerned the cable will fall out.
-
Screw the LCD into the LCD housing. Use the 4 screws previously removed before.
-
Power on the laptop to test the new LCD. If it works, snap the bezel back onto the laptop. Finish reassembling the laptop.
クリエイティブコモンズのオープンソース著作権のもと、あなたの投稿は著作権の対象となります。