メインコンテンツにスキップ

iMac Intel 21.5インチ EMC 2805のディスプレイアセンブリの交換

注意:あなたはさきほど閲覧しているガイドの前提となるページを編集しています。あなたが行った変更は、この手順を含むガイド全体に影響を与えます。

英語
日本語

手順 15を翻訳中

手順15
iMac Intel 21.5" EMC 2805 Display Assembly Replacement: 手順 0、 2の画像 1 iMac Intel 21.5" EMC 2805 Display Assembly Replacement: 手順 0、 2の画像 2
  • Gently twist the card upward, slightly increasing the space between the display and frame.

  • As with the other side, twist slowly to allow the adhesive time to separate, and be careful not to over-stress the display glass.

ゆっくりとカードを上向きにツイストして、ディスプレイとフレームの間の隙間を広げます。

反対側も同様に、接着剤が乖離するようにゆっくりとツイストします。ディスプレイのガラスに余分な圧力がかからないようご注意ください。

クリエイティブコモンズのオープンソース著作権のもと、あなたの投稿は著作権の対象となります