注意:あなたは必要条件ガイドを編集しています。あなたが行なう変更は、この手順を含む全ての10個のガイドに反映されます。
手順 4を翻訳中
手順4
-
Remove the single 2.3 mm Phillips screw securing the battery connector to the logic board.
-
Leave the blocker there to prevent the battery connector leads from making contact until you have completed your repairs.
クリエイティブコモンズのオープンソース著作権のもと、あなたの投稿は著作権の対象となります。