メインコンテンツにスキップ

MacBook Pro 13インチ Retina Display Late 2013 のディスプレイアセンブリの交換

注意:あなたはさきほど閲覧しているガイドの前提となるページを編集しています。あなたが行った変更は、この手順を含むガイド全体に影響を与えます。

英語
日本語

手順 8を翻訳中

手順8
MacBook Pro 13" Retina Display Late 2013 Display Assembly Replacement: 手順 0、 3の画像 1 MacBook Pro 13" Retina Display Late 2013 Display Assembly Replacement: 手順 0、 3の画像 2 MacBook Pro 13" Retina Display Late 2013 Display Assembly Replacement: 手順 0、 3の画像 3
  • Use a pair of tweezers to lift aluminum hinge brackets off the right and left display hinges.

  • During reassembly, the vertical portion of the bracket should be in line with the aluminum rail in the center of the Macbook.

ピンセットを使って、アルミ製丁番ブラケットを左右のディスプレイ丁番から持ち上げます。

再組み立ての際は、MacBook中央にあるアルミ製レールに対してブラケットが垂直の向きになるように装着します。

クリエイティブコモンズのオープンソース著作権のもと、あなたの投稿は著作権の対象となります