メインコンテンツにスキップ

iPad Mini CDMAのフロントパネルの交換

注意:あなたはさきほど閲覧しているガイドの前提となるページを編集しています。あなたが行った変更は、この手順を含むガイド全体に影響を与えます。

英語
日本語

手順 21を翻訳中

手順21
iPad Mini CDMA Front Panel Replacement: 手順 0、 3の画像 1 iPad Mini CDMA Front Panel Replacement: 手順 0、 3の画像 2 iPad Mini CDMA Front Panel Replacement: 手順 0、 3の画像 3
  • Leave the pick from the last step in place to prevent the adhesive from re-sealing.

  • With a new pick, slice gently over the left-hand antenna, stopping before the home button.

  • Only slide the pick from the outer edge toward the center of the iPad. Do not move the pick back toward the outer edge, as moving in this direction may damage the antenna.

  • If you need to slide the pick over the lower section more than once, remove it and re-insert at the outer edge, and slide inwards.

  • Leave the pick in place before moving on.

前回の手順のピックをそのままの位置にのこします。接着剤が再装着するのを防ぐためです。

新しいピックを取り出して、左側のアンテナの上を丁寧にスライスしながら移動させ、ホームボタンの手前で止めます。

外側の端からiPadの中心に向かってピックをスライドさせてください。中心から外側に向かって移動させないでください。この方向に動かすとアンテナにダメージを与えてしまう可能性があります。

再度ピックで下部端をスライドさせたい場合は同じく外側から中央部分に向かってスライドさせます。

次の手順に移る前にピックをホームボタン手前で止めます。

クリエイティブコモンズのオープンソース著作権のもと、あなたの投稿は著作権の対象となります