手順 7を翻訳中
手順7
-
Open the hinge and carefully pop off the Upper LCD using your fingers.
-
Gently remove the ribbon from the hinge.
-
Adhere the cover to the new screen by using thin adhesive around the edges, or by reusing the old adhesive.
[* black] Open the hinge and carefully pop off the Upper LCD using your fingers. | |
[* black] Gently remove the ribbon from the hinge. | |
+ | [* icon_note] Though not required, the task of removing the ribbon cables becomes much easier once you remove the hinge barrel on the right side of the device. |
[* icon_caution] Do not lose the tiny fabric and rubber water-resistant rectangles that cover the two speakers; they often fall out once the speakers are removed. | |
[* icon_reminder] The screen's cover glass can be replaced or transferred to your new screen. The cover is easily scratched by metal tools; use plastic or your fingernail to separate it. | |
[* black] Adhere the cover to the new screen by using thin adhesive around the edges, or by reusing the old adhesive. | |
+ | [* icon_reminder] To reinsert the hinge piece, open the console to the last click before it's completely flat. |
クリエイティブコモンズのオープンソース著作権のもと、あなたの投稿は著作権の対象となります。