修理を始めるには コミュニティ ストア

iPad Mini CDMA 前面板组件更换

注意：あなたは必要条件ガイドを編集しています。あなたが行なう変更は、この手順を含む全ての5個のガイドに反映されます。

ガイドに戻る
英語
中国語
前の手順 次の手順

手順 3を翻訳中

手順3
iPad Mini CDMA Front Panel Assembly Replacement, Transfer the smart cover magnets: 手順 0、 2の画像 1 iPad Mini CDMA Front Panel Assembly Replacement, Transfer the smart cover magnets: 手順 0、 2の画像 2
Transfer the smart cover magnets

  • Before you install your new front panel, you'll need to transfer the smart cover magnets on your OLD front panel to your new front panel.

  • Place the edge of a plastic opening tool on each side of the magnet near the top left corner of the front panel assembly.

  • Carefully wedge the edge of the right plastic opening tool underneath the magnet.

  • Steadily hold the right plastic opening tool in place.

  • Wedge the left plastic opening tool underneath the magnet and simultaneously pry and push it towards the right plastic opening tool.

  • This will require some force as the smart cover magnet is held in place with strong adhesive.

ここに翻訳を挿入する

在安装新的前面板之前，需要将旧的前面板上的smart cover 磁铁转移到新的前面板上。

将塑料打开工具的边缘放在靠近磁铁侧，位于前面板组件的左上方。

使用右边的塑料打开工具小心地楔住磁体下面。

将右侧的打开工具固定住。

将左侧塑料打开工具楔入磁铁下方，同时向右侧工具方向撬动。

这将需要用些力量，因为smart cover磁贴用强力粘合剂所固定。

+[title] Transfer the smart cover magnets
[* icon_reminder] Before you install your new front panel, you'll need to transfer the smart cover magnets on your ***OLD*** front panel to your new front panel.
[* black] Place the edge of a plastic opening tool on each side of the magnet near the top left corner of the front panel assembly.
[* black] Carefully wedge the edge of the right plastic opening tool underneath the magnet.
[* icon_note] Steadily hold the right plastic opening tool in place.
[* black] Wedge the left plastic opening tool underneath the magnet and simultaneously pry and push it towards the right plastic opening tool.
[* icon_caution] This will require some force as the smart cover magnet is held in place with strong adhesive.

クリエイティブコモンズのオープンソース著作権のもと、あなたの投稿は著作権の対象となります。