手順 1を翻訳中
手順1
-
Place a spool on the pin. Pull the thread from the spool straight out, following the length of the machine.
-
Hook the thread under the eyelet on the outer edge of the machine.
-
With one hand, hold the spool steady. Using the eyelet as a pivot, pull the string perpendicular with the other hand. Lay the thread into the slot, which bisects the top of the machine.
クリエイティブコモンズのオープンソース著作権のもと、あなたの投稿は著作権の対象となります。