手順 1を翻訳中
手順1
Adjusting vertical alignment
-
The vertical alignment can be adjusted without disassembling the camera top cover. However, the same adjustment can be performed with the top cover off or the RF assembly extracted.
-
Remove the adjustment screw cover by rotating it with a lens wrench or custom tool. Note that uses a bayonet mount with no threads, so at most 90˚ rotation is needed.
-
Adjust the vertical alignment as needed. The same adjustment screw is used when adjusting in a more disassembled state.
クリエイティブコモンズのオープンソース著作権のもと、あなたの投稿は著作権の対象となります。