手順 2を翻訳中
手順2
Coarse adjustment of the horizontal alignment at infinity
-
This step is only necessary if the rangefinder is significantly off horizontally.
-
Remove the RF assembly following the Leningrad disassembly guide.
-
Screw the eyepiece (blue box) back into the RF assembly for viewing during the adjustment.
-
Loosen the screw circled in green. Carefully shift the arm secured by the screw to adjust the mirror position. Caution: the adjustment is very sensitive.
-
Tighten the screw, temporarily put back the rangefinder assembly into the body. Confirm the rangefinder patch is in the correct ballpark with a lens.
クリエイティブコモンズのオープンソース著作権のもと、あなたの投稿は著作権の対象となります。