メインコンテンツにスキップ

Sony DualSense Controller Vervanging van de achterste behuizing

注意:あなたは必要条件ガイドを編集しています。あなたが行なう変更は、この手順を含む全ての26個のガイドに反映されます。

英語
オランダ語

手順 1を翻訳中

手順1
Rear Case Separation, Remove the rear case screws: 手順 0、 2の画像 1 Rear Case Separation, Remove the rear case screws: 手順 0、 2の画像 2
Remove the rear case screws
  • Use a Phillips screwdriver to remove the two 6.4 mm screws securing the bottom corners of the lower case.

Gebruik een Phillips-schroevendraaier om de twee 6.4 mm lange schroeven, die je aan de onderkant van de twee handvatten vindt, te verwijderen.

-[title] Remove the rear case
+[title] Remove the rear case screws
[* red] Use a Phillips screwdriver to remove the two 6.4 mm screws securing the bottom corners of the lower case.

クリエイティブコモンズのオープンソース著作権のもと、あなたの投稿は著作権の対象となります