メインコンテンツにスキップ

Sostituzione del vetro posteriore dell'iPhone 16 Pro Max

注意:あなたは必要条件ガイドを編集しています。あなたが行なう変更は、この手順を含む全ての12個のガイドに反映されます。

英語
イタリア語

手順 12を翻訳中

手順12
iPhone 16 Pro Max Back Glass Removal, Remove the battery connector cover: 手順 0、 1の画像 1
Remove the battery connector cover
  • Use a tri-point Y000 driver to remove the three screws securing the battery connector cover:

  • Two 1.3 mm‑long screws

  • One 1.0 mm‑long screw

Usa un cacciavite tri-point Y000 per rimuovere le tre viti che fissano il coperchio del connettore della batteria:

Due viti da 1,3 mm di lunghezza

Una vite da 1,0 mm di lunghezza

クリエイティブコモンズのオープンソース著作権のもと、あなたの投稿は著作権の対象となります