メインコンテンツにスキップ

iPhone 16 Pro Max Glasrückseite tauschen

注意:あなたは必要条件ガイドを編集しています。あなたが行なう変更は、この手順を含む全ての12個のガイドに反映されます。

英語
ドイツ語

手順 6を翻訳中

手順6
iPhone 16 Pro Max Back Glass Removal, Separate the left adhesive: 手順 0、 2の画像 1 iPhone 16 Pro Max Back Glass Removal, Separate the left adhesive: 手順 0、 2の画像 2
Separate the left adhesive
  • Insert a second opening pick into the bottom-left corner, close to the existing pick.

  • Don't insert your pick deeper than 3 mm to avoid damaging the spring contacts.

  • Slide your pick along the left edge to separate the adhesive and release the metal clips.

  • You'll hear and feel the metal clips release as you pass them.

  • Leave this pick inserted in the top-left corner to prevent the adhesive from resealing.

Setze ein zweites Plektrum in der Nähe des bereits vorhandenen Plektrums in die untere linke Ecke ein.

Setze das Plektrum nicht tiefer als 3 mm ein, damit die Federkontakte nicht beschädigt werden.

Schiebe das Plektrum an der linken Seitenkante entlang um den Kleber aufzutrennen und die Metallclips zu lösen.

Du spürst und hörst es, wenn sich die Metallclips löst.

Lasse das Plektrum in der oberen linken Ecke stecken, damit sich der Kleber nicht wieder verbinden kann.

クリエイティブコモンズのオープンソース著作権のもと、あなたの投稿は著作権の対象となります