メインコンテンツにスキップ

Apple Thunderbolt Display ist schwarz - Reparatur des Bildausfalls

英語
ドイツ語

手順 14を翻訳中

手順14
Apple Thunderbolt Display Black Blanking Out Repair, Remove outer metal frame: 手順 0、 2の画像 1 Apple Thunderbolt Display Black Blanking Out Repair, Remove outer metal frame: 手順 0、 2の画像 2
Remove outer metal frame
  • Start lifting the outer metal frame from the side with lifting tab. This is to avoid any scraping motion over the buffer board gold foil flex cable.

  • The corners on the lift tab side is slightly flexable. Probably need 2 pry tool on each side of the corner to release it. Be gentle as LCD glass is just under the outer metal frame. Luckily it sits in a plastic tub (see next steps pics) so should be safe from any prying tool

Hebe zunächst den äußeren Metallrahmen seitlich mit der Hebelasche an. Dadurch wird eine Kratzbewegung über das Goldfolien-Flexkabel der Pufferplatine verhindert.

Die Ecken auf der Seite der Hebelaschen sind etwas flexibel. Wahrscheinlich braucht man zwei Hebelwerkzeuge auf jeder Seite, um sie zu lösen. Sei vorsichtig - das LCD-Glas ist direkt unter dem Metallrahmen. Glücklicherweise liegt es in einer Plastikwanne (siehe Bilder der nächsten Schritte), sodass es vor Hebelwerkzeugen geschützt sein sollte.

Glossar:

not sure corner is solid metal, maybe taped and have a little flex - Ich bin mir nicht sicher, ob die Ecke aus massivem Metall ist, vielleicht mit Klebeband verklebt und etwas biegsam.

dismount these 2 corner first. Use pry/wedge points on top and side to pop up corner is difficult but flex a little and can get to pop up - Demontiere diese 2 Ecken zuerst. Verwende Hebel-/Keilpunkte oben und an der Seite, um die Ecke hochzubekommen. Das ist schwierig, aber wenn du dich ein wenig biegst, kannst du sie hochbekommen.

corner flex a little not solid metal? taped? - Ecke etwas flexibel, kein festes Metall? Mit Klebeband befestigt?

wedge pry points - Ansatzpunkte für Hebelwerkzeug

クリエイティブコモンズのオープンソース著作権のもと、あなたの投稿は著作権の対象となります