メインコンテンツにスキップ

Scollegamento batteria

注意:あなたは必要条件ガイドを編集しています。あなたが行なう変更は、この手順を含む全ての10個のガイドに反映されます。

英語
イタリア語

手順 1を翻訳中

手順1
Battery Disconnect, Disconnect the battery: 手順 0、 3の画像 1 Battery Disconnect, Disconnect the battery: 手順 0、 3の画像 2 Battery Disconnect, Disconnect the battery: 手順 0、 3の画像 3
Disconnect the battery
  • Use a pair of tweezers or your fingers to remove the metal cover on the right edge of your phone.

  • During reassembly, place the upper left corner of the cover under the hook on the logic board before laying it into place.

Usa delle pinzette o le dita per rimuovere la copertura in metallo sul bordo destro del telefono.

Durante il riassemblaggio, posiziona l'angolo superiore sinistro della copertura sotto il gancio sulla scheda logica prima di appoggiarla in posizione.

クリエイティブコモンズのオープンソース著作権のもと、あなたの投稿は著作権の対象となります