メインコンテンツにスキップ

iPad Mini CDMAのフロントパネルの交換

注意:あなたはさきほど閲覧しているガイドの前提となるページを編集しています。あなたが行った変更は、この手順を含むガイド全体に影響を与えます。

英語
日本語

手順 8を翻訳中

手順8
iPad Mini CDMA Front Panel Replacement: 手順 0、 3の画像 1 iPad Mini CDMA Front Panel Replacement: 手順 0、 3の画像 2 iPad Mini CDMA Front Panel Replacement: 手順 0、 3の画像 3
  • Take the first pick you inserted and slide it up toward the top corner of the iPad.

  • If you can see the tip of the opening pick through the front glass, don't panic—just pull the pick out a little bit. Most likely, everything will be fine, but try to avoid this as it may deposit adhesive on the front of the LCD that is difficult to clean off.

iPadの上部端に向かって最初に差し込んだピックをスライドさせます。

開口ピックの先端がフロントガラス越しに見えても驚かないでください。ピックを少し外側に引いてください。大体の場合は問題ありませんが、液晶ディスプレイ側の正面側に接着剤がついてしまうと取り除くのに時間がかかるためご注意ください。

クリエイティブコモンズのオープンソース著作権のもと、あなたの投稿は著作権の対象となります