注意:あなたはさきほど閲覧していたガイドの前提条件を編集しています。あなたが行った変更は、この手順を含む個のガイド全体に影響を与えます。
手順 2を翻訳中
手順2
-
The battery is held in place by 3 screws. Use the Phillips #0 screwdriver to remove the screws that secure the battery.
-
M2 × 6 mm, Phillips-head, nylok-coated (3)
クリエイティブコモンズのオープンソース著作権のもと、あなたの投稿は著作権の対象となります。