iPhone 15 Plus Battery Disconnection

注意：あなたは必要条件ガイドを編集しています。あなたが行なう変更は、この手順を含む全ての8個のガイドに反映されます。

英語

韓国語

手順 3を翻訳中

手順3

Hold the back glass upright with one hand and rotate the bottom edge to the left to reveal the battery press connector just below the volume buttons.
Use the tip of an opening pick to pry up and disconnect the battery press connector from the logic board.
A plus and minus sign is printed on the head of this connector.
To reconnect a press connector, align it over its socket and gently press down on one side until it clicks into place, then press down on the other side. Make sure it sits flat, as the insulating rubber around the sockets might prevent it from connecting fully.

クリエイティブコモンズのオープンソース著作権のもと、あなたの投稿は著作権の対象となります。