メインコンテンツにスキップ

iPhone 15 Plus Akku abtrennen

注意:あなたは必要条件ガイドを編集しています。あなたが行なう変更は、この手順を含む全ての8個のガイドに反映されます。

英語
ドイツ語

手順 3を翻訳中

手順3
iPhone 15 Plus Battery Disconnection: 手順 0、 3の画像 1 iPhone 15 Plus Battery Disconnection: 手順 0、 3の画像 2 iPhone 15 Plus Battery Disconnection: 手順 0、 3の画像 3
  • Hold the back glass upright with one hand and rotate the bottom edge to the left to reveal the battery press connector just below the volume buttons.

  • Use the tip of an opening pick to pry up and disconnect the battery press connector from the logic board.

  • A plus and minus sign is printed on the head of this connector.

  • To reconnect a press connector, align it over its socket and gently press down on one side until it clicks into place, then press down on the other side. Make sure it sits flat, as the insulating rubber around the sockets might prevent it from connecting fully.

Halte die Rückseite aus Glas mit einer Hand aufrecht und drehe die Unterkante nach links, um den den Druckstecker des Akkus direkt unterhalb der Lautstärketasten freizulegen.

Heble den Druckstecker des Akkus mit der Spitze eines Plektrums vom Logic Board hoch und trenne ihn ab.

Auf diesen Stecker ist ein Plus- und Minuszeichen aufgedruckt.

Um Druckstecker wieder anzuschließen, musst du ihn erst über seinem Anschluss ausrichten und vorsichtig auf einer Seite nach unten drücken, bis er einrastet. Drücke dann auch die andere Seite fest. Achte darauf, dass er flach sitzt, es könnte sein, dass die Gummiisolierschicht um den Anschluss einen guten Kontakt verhindert.

クリエイティブコモンズのオープンソース著作権のもと、あなたの投稿は著作権の対象となります