修理を始めるには コミュニティ ストア

Pixel 8 Pro Antennenkabel abtrennen

注意：あなたは必要条件ガイドを編集しています。あなたが行なう変更は、この手順を含む全ての3個のガイドに反映されます。

ガイドに戻る
英語
ドイツ語

手順 1を翻訳中

手順1
Pixel 8 Pro Pixel 8 Pro Antenna Cable Disconnect, Disconnect the antenna cable: 手順 0、 3の画像 1 Pixel 8 Pro Pixel 8 Pro Antenna Cable Disconnect, Disconnect the antenna cable: 手順 0、 3の画像 2 Pixel 8 Pro Pixel 8 Pro Antenna Cable Disconnect, Disconnect the antenna cable: 手順 0、 3の画像 3
Disconnect the antenna cable

  • Insert one arm of a pair of angled tweezers under the metal neck of the black antenna cable coaxial connector, located on the top left corner of the logic board.

  • Gently lift straight up to disconnect the cable.

  • To reconnect the cable, hold the connector in place over its socket and press down with the flat end of a spudger—the connector should snap into place. If you're having trouble, don't try to force the connector over the socket. Reposition it and try again.

Antennenkabel abtrennen

Setze eine der Spitzen einer abgewinkelten Antenne unter das Metallende am Koaxialstecker des schwarzen Antennenkabels in der oberen linken Ecke des Logic Boards.

Hebe vorsichtig hoch, um das Kabel abzutrennen.

Um das Kabel wieder anzuschließen, musst du den Stecker über dem Anschluss ausrichten und mit dem flachen Ende des Spudgers nach unten drücken, er sollte dann einrasten. Drücke den Stecker nicht mit Gewalt ein. Richte ihn gegebenenfalls nochmals neu aus und probiere es erneut.

[title] Disconnect the antenna cable
-[* black] Insert one arm of a pair of angled tweezers under the metal neck of the black antenna cable [guide|25629|coaxial connector|stepid=64972|new_window=true], located on the top left corner of the logic board.
+[* black] Insert one arm of a pair of [product|IF145-020-5|angled tweezers] under the metal neck of the black antenna cable [guide|25629|coaxial connector|stepid=64972|new_window=true], located on the top left corner of the logic board.
[* black] Gently lift straight up to disconnect the cable.
-[* icon_reminder] To reconnect the cable, hold it in place over its socket and press down with the flat end of a spudger—the connector should snap into place. Don't try to force the connector into the socket. Reposition it and try again.
+[* icon_reminder] To reconnect the cable, hold the connector in place over its socket and press down with the flat end of a spudger—the connector should snap into place. If you're having trouble, don't try to force the connector over the socket. Reposition it and try again.

クリエイティブコモンズのオープンソース著作権のもと、あなたの投稿は著作権の対象となります。