手順 4を翻訳中
手順4
The Fix
-
What you will need to repair. Soldering Iron, paste flux and solder.
-
Next you will want to heat up your solder station and apply some flux to both the wire and the connector pin. I prefer to use Amtech flux however any flux is better then no flux.
-
Find a comfortable position that limits the amount of movement of both the wire and then switch.
-
Solder the wire to the pin.
クリエイティブコモンズのオープンソース著作権のもと、あなたの投稿は著作権の対象となります。