ご注意:あなたは前提となるガイドを編集しています。あなたが行なう変更は、この手順を含むガイド全体に反映されます。
手順 4を翻訳中
手順4
Remove the battery adhesive film
-
Grab the bottom right edge of the leftover adhesive film and pull it towards the top of the phone with steady force to remove it.
-
Apply isopropyl alcohol (>90%) to the old adhesive and use the flat end of a spudger to scrape it off.
-
Remove the clear liner on the pre-cut battery adhesive and apply the sticky section to the battery well. Remove the opaque liner before continuing reassembly.
-
Remove the battery adhesive film from its liners and apply it to the battery.
-
Align the bottom edge of the battery (the edge without adhesive) with the bottom edge of the recess.
-
Lower the battery down and press firmly to secure it in place.
[title] Remove the battery adhesive film | |
- | [* black] Grab the bottom right edge of the leftover adhesive film. |
- | [* black] Pull the film towards the top of the phone with steady force to remove it. |
+ | [* black] Grab the bottom right edge of the leftover adhesive film and pull it towards the top of the phone with steady force to remove it. |
[* icon_reminder] To install a replacement battery: | |
+ | [* black] Apply isopropyl alcohol (>90%) to the old adhesive and use the flat end of a spudger to scrape it off. |
+ | [* black] Remove the clear liner on the pre-cut battery adhesive and apply the sticky section to the battery well. Remove the opaque liner before continuing reassembly. |
+ | [* black] Remove the battery adhesive film from its liners and apply it to the battery. |
[* black] Align the bottom edge of the battery (the edge without adhesive) with the bottom edge of the recess. | |
[* black] Lower the battery down and press firmly to secure it in place. |
クリエイティブコモンズのオープンソース著作権のもと、あなたの投稿は著作権の対象となります。