メインコンテンツにスキップ

Logitech(ロジクール)MX Anywhere 2S バッテリーの交換

ご注意:あなたは前提となるガイドを編集しています。あなたが行なう変更は、この手順を含むガイド全体に反映されます。

英語
日本語

手順 2を翻訳中

手順2
Logitech MX Anywhere 2S Battery Replacement, Disconnect the battery: 手順 0、 2の画像 1 Logitech MX Anywhere 2S Battery Replacement, Disconnect the battery: 手順 0、 2の画像 2
Disconnect the battery
  • Use a pair of tweezers or your fingers to grip the top of the battery connector.

  • Always pull cables by their connectors and not the wires themselves.

  • Gently rock the connector side to side and pull it out of its socket.

  • The connector is held tightly within its socket. If it feels stuck, try a different grip—use the protrusions around the neck of the connector if you need more leverage.

  • If the connector won't budge, skip to the next step for an alternate method.

ピンセットもしくは指でバッテリーコネクタ上部を摘まみます。

ワイヤではなく、コネクタを摘んでケーブルを引っ張ってください。

コネクタを左右に揺らしながら、ゆっくりソケットより引き抜きます。

コネクターはソケットの中でしっかりと固定されています。もし、引っかかるようであれば、別の握り方を試してみてください。もっと力が必要であれば、コネクタの首の周りの突起部分を摘まんでみてください。

コネクタが外れない場合は、次の手順をスキップして代わりの方法を試してみます。

クリエイティブコモンズのオープンソース著作権のもと、あなたの投稿は著作権の対象となります