Screen Prerequisite (No LiDAR Assembly Removal)

注意：あなたは必要条件ガイドを編集しています。あなたが行なう変更は、この手順を含む全ての3個のガイドに反映されます。

英語

中国語

手順 3を翻訳中

手順3

Remove the screen

Grip the right edge of the screen and lift it away.
During reassembly, before installing a display, remove any remaining adhesive from the frame, and clean the glued areas with high-strength (>90%) isopropyl alcohol and a lint-free cloth. This helps prep the iPad for fresh adhesive and ensures that it will bond properly.
If you plan to reinstall your existing screen, remove any remaining adhesive from the back and clean the adhered areas with isopropyl alcohol.
Follow this guide to install pre-cut adhesive strips on your iPad before sealing it up.

クリエイティブコモンズのオープンソース著作権のもと、あなたの投稿は著作権の対象となります。