メインコンテンツにスキップ

開口方法 (1st and 2nd Gen)

注意:あなたは必要条件ガイドを編集しています。あなたが行なう変更は、この手順を含む全ての7個のガイドに反映されます。

英語
日本語

手順 16を翻訳中

手順16
Opening Procedure (1st and 2nd Gen): 手順 0、 2の画像 1 Opening Procedure (1st and 2nd Gen): 手順 0、 2の画像 2
  • Insert a new opening pick to the left of the USB-C port.

  • Separate the remaining bottom edge adhesive.

  • Don't insert the opening pick more than 5 mm when separating the bottom edge adhesive.

  • Leave the pick in the bottom left corner to prevent the bottom edge adhesive from re-sealing.

USB-Cポート左側に新しいオープニングピックを挿入します。

残りの下端接着剤を切り離します。

下端接着剤を切り離す際に、オープニングピックを5mm以上差し込まないでください。

下端接着剤の再装着を防ぐため、左下にピックを残したままにします。

クリエイティブコモンズのオープンソース著作権のもと、あなたの投稿は著作権の対象となります