注意：あなたは必要条件ガイドを編集しています。あなたが行なう変更は、この手順を含む全ての2個のガイドに反映されます。
手順 5を翻訳中
手順5
Remove the battery
-
Tilt the battery out of the device to separate the rest of the adhesive.
-
Remove the battery.
-
Apply pre-cut adhesive adhesive or double-sided tape to the battery well at the places where the old adhesive was located, not directly onto the battery.
-
Temporarily reconnect the battery to the motherboard to help align it correctly. Disconnect the battery after it's seated.
-
Make sure that the battery sits in the center of the battery well and there's an even gap around the battery.
-
Press the new battery firmly into place.
クリエイティブコモンズのオープンソース著作権のもと、あなたの投稿は著作権の対象となります。