メインコンテンツにスキップ

iPhone 14 Pro Max スクリーンの必須条件

注意:あなたはさきほど閲覧しているガイドの前提となるページを編集しています。あなたが行った変更は、この手順を含むガイド全体に影響を与えます。

英語
日本語

手順 13を翻訳中

手順13
iPhone 14 Pro Max Screen prereq, Slice the left edge adhesive: 手順 0、 2の画像 1 iPhone 14 Pro Max Screen prereq, Slice the left edge adhesive: 手順 0、 2の画像 2
Slice the left edge adhesive
  • Insert a second opening pick in the bottom left corner of the iPhone.

  • Twist both picks simultaneously until the left edge clips release.

  • Apply the twisting force gradually.

  • If you're having trouble separating the adhesive, reheat the left edge.

iPhoneの左下コーナーに2番目のオープニングピックを挿入します。

左端のクリップが外れるまで、両方のピックを同時にひねります。

少しずつ捻りながら力を加えていきます。

接着剤の分離がうまくいかない場合は、左端を再加熱してください。

クリエイティブコモンズのオープンソース著作権のもと、あなたの投稿は著作権の対象となります