メインコンテンツにスキップ

Opening Procedure (3rd Gen)

注意:あなたは必要条件ガイドを編集しています。あなたが行なう変更は、この手順を含む全ての6個のガイドに反映されます。

英語
オランダ語

手順 25を翻訳中

手順25
Opening Procedure (3rd Gen), Disconnect the ambient light sensor cable: 手順 0、 2の画像 1 Opening Procedure (3rd Gen), Disconnect the ambient light sensor cable: 手順 0、 2の画像 2
Disconnect the ambient light sensor cable
  • Use the flat end of a spudger to disconnect the ambient light sensor cable by lifting straight up on the press connectors.

  • To re-attach press connectors like this one, carefully align and press down on one side until it clicks into place, then repeat on the other side. Do not press down on the middle. If the connector is misaligned, the pins can bend and cause permanent damage.

ここに翻訳を挿入する

ここに翻訳を挿入する

クリエイティブコモンズのオープンソース著作権のもと、あなたの投稿は著作権の対象となります