メインコンテンツにスキップ

Samsung Galaxy S21 ワイヤレス充電コイルの交換

注意:あなたは必要条件ガイドを編集しています。あなたが行なう変更は、この手順を含む全ての2個のガイドに反映されます。

英語
日本語

手順 3を翻訳中

手順3
Samsung Galaxy S21 Wireless Charging Coil Replacement, Disconnect the battery: 手順 0、 2の画像 1 Samsung Galaxy S21 Wireless Charging Coil Replacement, Disconnect the battery: 手順 0、 2の画像 2
Disconnect the battery
  • While using tweezers, or your fingers, to hold the motherboard bracket out of the way, use a spudger to pry up the battery press connector.

  • Take care to pry only under the edge of the connector to prevent damaging the socket itself and surrounding components.

  • To re-attach press connectors like this one, carefully align and press down on one side until it clicks into place, then repeat on the other side. Do not press down on the middle. If the connector is misaligned, the pins can bend, causing permanent damage.

ピンセットもしくは指先で、マザーボードのブラケットを作業の邪魔にならない位置に固定して、バッテリーのプレスコネクタをスパッジャーでこじ開けます。

ソケット本体や周辺部品を傷つけないように、コネクタの端だけをこじ開けるように注意してください。

このようなプレスコネクタを再装着するには、慎重に位置を合わせて片側をカチッと音がするまで押し下げ、反対側も同様に行います。真ん中は押さないでください。コネクタの位置がずれると、ピンが曲がってしまい、永久的な損傷を与える可能性があります。

クリエイティブコモンズのオープンソース著作権のもと、あなたの投稿は著作権の対象となります