メインコンテンツにスキップ

Nintendo Switch OLEDモデル リアケースの交換

注意:あなたはさきほど閲覧しているガイドの前提となるページを編集しています。あなたが行った変更は、この手順を含むガイド全体に影響を与えます。

英語
日本語

手順 1を翻訳中

手順1
Nintendo Switch OLED Model Rear Case Replacement, Release the Joy Con controller locking tabs: 手順 0、 3の画像 1 Nintendo Switch OLED Model Rear Case Replacement, Release the Joy Con controller locking tabs: 手順 0、 3の画像 2 Nintendo Switch OLED Model Rear Case Replacement, Release the Joy Con controller locking tabs: 手順 0、 3の画像 3
Release the Joy Con controller locking tabs
  • Before you begin this repair, make sure the device is completely powered off.

  • Press and hold down the small round button on the back of the Joy Con controller.

  • While you hold down the button, slide the controller upward.

この修理を始める前に、デバイスの電源を切ってください。

ジョイコン コントローラの背面にある小さな丸いボタンを長押しします。

ボタンを押しながら、コントローラを上方向にスライドさせます。

クリエイティブコモンズのオープンソース著作権のもと、あなたの投稿は著作権の対象となります