メインコンテンツにスキップ

Nintendo Switch OLEDモデル ドックUSB-Cアセンブリの交換

注意:あなたは必要条件ガイドを編集しています。あなたが行なう変更は、この手順を含む全ての3個のガイドに反映されます。

英語
日本語

手順 3を翻訳中

手順3
Nintendo Switch OLED Model Dock USB-C Assembly Replacement: 手順 0、 2の画像 1 Nintendo Switch OLED Model Dock USB-C Assembly Replacement: 手順 0、 2の画像 2
  • Depending on how you disassembled the dock, the springs may still be connected to the top-most portion of the assembly.

  • Remove the two springs.

ドックの分解方法によっては、一番上の部分にネジが接続されたままになっている場合があります。

2本のネジを外します。

クリエイティブコモンズのオープンソース著作権のもと、あなたの投稿は著作権の対象となります