手順 3を翻訳中
手順3
-
Remove the single 3.5 mm screw that secures the SSD card using a Phillips #00 screwdriver.
クリエイティブコモンズのオープンソース著作権のもと、あなたの投稿は著作権の対象となります。
Remove the single 3.5 mm screw that secures the SSD card using a Phillips #00 screwdriver.
The SSD card will spring up to one side on its own.
クリエイティブコモンズのオープンソース著作権のもと、あなたの投稿は著作権の対象となります。
次の行
前の行
下に新しい行を挿入
上に新しい行を挿入
現在の行をインデントする
現在の行をインデント解除する
現在の行を削除する
次の手順に移動します。
前の手順に移動します。
ヘルプを開く