メインコンテンツにスキップ

iPhone 13 Pro 拆解

英語
中国語

手順 9を翻訳中

手順9
iPhone 13 Pro Teardown: 手順 0、 3の画像 1 iPhone 13 Pro Teardown: 手順 0、 3の画像 2 iPhone 13 Pro Teardown: 手順 0、 3の画像 3
  • Up top we find the relocated earpiece speaker, complete with a cute little snoot. That snoot lives between the front-facing camera and Face ID hardware, and connects to a channel that directs sound out the top of the display.

  • While we love simple spring contacts, one of this speaker's standoff screws is trapped under the logic board, meaning you'll have to remove the board to swap the speaker! These layers are quite the repair ogre …

  • With its cables running underneath said earpiece speaker (which, again, is underneath the logic board) the front-facing camera hardware—enabler of the new, shrunken Notch™—is not exactly a piece of cake to access. But, at last, we have arrived!

  • After pulling out all the big-name bits, we spy something with its very own cut-out in the case metal. Our guess is that it's an Ultra Wideband antenna. Say hi, Find My!

在顶部,我们找到了重新排布的听筒扬声器,配有可爱的小鼻子。这个鼻子位于前置摄像头和Face ID之间,并连接到将声音从显示屏顶部引导出来的通道。

虽然我们喜欢简单的弹簧触点,但这款扬声器的一个支架螺丝被困在主板下方,这意味着你必须取下主板才能更换扬声器!这些叠层真是相当的令修理抓狂……

由于连接线在上述的听筒扬声器下方(同样位于主板下方),前置摄像头——新的、缩小的“刘海”™的推动者——并不是非常容易访问的元件。但是,我们终于抵达了!

在取出所有的主要零件后,我们在金属中框中发现了一个拥有自己的凹槽的零件。我们猜测它是一个UWB天线。打个招呼吧,找到我了!

クリエイティブコモンズのオープンソース著作権のもと、あなたの投稿は著作権の対象となります