メインコンテンツにスキップ

開口方法とバッテリー接続の外し方

注意:あなたはさきほど閲覧しているガイドの前提となるページを編集しています。あなたが行った変更は、この手順を含むガイド全体に影響を与えます。

英語
日本語

手順 12を翻訳中

手順12
Opening Procedure and Battery Disconnect: 手順 0、 3の画像 1 Opening Procedure and Battery Disconnect: 手順 0、 3の画像 2 Opening Procedure and Battery Disconnect: 手順 0、 3の画像 3
  • Round the left corner with the opening pick and slide it along the top edge of the Surface. Stop when the pick is 2.75 inches (70 mm) away from the left edge.

  • The next 6 inches (15 cm) of the top edge of the case is covered by the left and right antennas, which sit between the case and the screen bezel. Follow the next steps carefully to avoid damaging the antennas.

オープニングピックを、Surace左上の角に沿ってスライドします。ピックが左端から70 mm離れたところで停止します。

ケース上端から15 cmの箇所は、ケースとスクリーンベゼルの間にある左右のアンテナで覆われています。アンテナの損傷を防ぐために、次の手順を慎重に行ってください。

クリエイティブコモンズのオープンソース著作権のもと、あなたの投稿は著作権の対象となります