メインコンテンツにスキップ

開口方法とバッテリー接続の外し方

注意:あなたはさきほど閲覧しているガイドの前提となるページを編集しています。あなたが行った変更は、この手順を含むガイド全体に影響を与えます。

英語
日本語

手順 4を翻訳中

手順4
Opening Procedure and Battery Disconnect, Insert an opening pick into the speaker opening: 手順 0、 2の画像 1 Opening Procedure and Battery Disconnect, Insert an opening pick into the speaker opening: 手順 0、 2の画像 2
Insert an opening pick into the speaker opening
  • Insert an opening pick into the speaker opening on the screen and slide the pick between the glass and speaker grille.

  • Don't insert the opening pick any deeper than the black bezel on the edge of the screen. Inserting the pick too far may damage the LCD.

スクリーン上のスピーカー開口部にオープニングピックを挿入し、ガラスとスピーカーグリルの間をスライドします。

スクリーン側面にある黒いベゼルよりも深いところにオープニングピックを挿入しないでください。ピックを深く挿入しすぎると、LCDが損傷する可能性があります。

クリエイティブコモンズのオープンソース著作権のもと、あなたの投稿は著作権の対象となります