修理を始めるには コミュニティ ストア

Changement bloc du châssis central Xbox Series X

注意：あなたは必要条件ガイドを編集しています。あなたが行なう変更は、この手順を含む全ての17個のガイドに反映されます。

ガイドに戻る
英語
フランス語
前の手順

手順 6を翻訳中

手順6
Xbox Series X Center Chassis Assembly Replacement, Remove the center chassis assembly: 手順 0、 3の画像 1 Xbox Series X Center Chassis Assembly Replacement, Remove the center chassis assembly: 手順 0、 3の画像 2 Xbox Series X Center Chassis Assembly Replacement, Remove the center chassis assembly: 手順 0、 3の画像 3
Remove the center chassis assembly

  • The center chassis is aligned to the shell with guide pegs. These pegs will need to slide out of their slots to allow the chassis to be lifted out.

  • Grip the center chassis and pull it towards the green fan grille at the top of the shell, uncoupling the guide pegs from the shell.

  • Lift out the center chassis assembly to remove it from the shell.

  • During reassembly, make sure neither of the ribbon cables get pinched as you lower the center chassis into the shell.

Retirer le châssis principal

Le châssis principal est aligné sur la coque à l'aide de plots de guidage. Ces plots doivent glisser hors de leurs fentes quand vous soulevez le châssis.

Saisissez le châssis principal et tirez-le vers la grille de ventilateur verte en haut de la coque, en désolidarisant les plots de guidage de la coque.

Soulevez le châssis principal pour le retirer de la coque.

Lors du remontage, assurez-vous qu'aucune nappe ne reste coincée lorsque vous insérez le châssis principal dans la coque.

[title] Remove the center chassis assembly
[* icon_note] The center chassis is aligned to the shell with guide pegs. These pegs will need to slide out of their slots to allow the chassis to be lifted out.
[* black] Grip the center chassis and pull it towards the green fan grille at the top of the shell, uncoupling the guide pegs from the shell.
[* black] Lift out the center chassis assembly to remove it from the shell.
- [* icon_reminder] During reassembly, make sure neither of the ribbon cables get pinched as you lower the center chassis into the shell.
+[* icon_reminder] During reassembly, make sure neither of the ribbon cables get pinched as you lower the center chassis into the shell.

クリエイティブコモンズのオープンソース著作権のもと、あなたの投稿は著作権の対象となります。