注意:あなたは必要条件ガイドを編集しています。あなたが行なう変更は、この手順を含む全ての10個のガイドに反映されます。
手順 8を翻訳中
手順8
Remove the optical drive ribbon cable
-
Use the flat end of a spudger to press down on the optical drive connector's metal locking tab.
-
With the metal tab depressed, use a pair of tweezers to pull the blue pull tab directly away from the connector to disconnect the cable from the optical drive.
クリエイティブコモンズのオープンソース著作権のもと、あなたの投稿は著作権の対象となります。