Xbox Series S 마더보드 교체하기

英語

韓国語

手順 2を翻訳中

手順2

With the head parallel to the motherboard, insert a flathead screwdriver from the side between the heat sink pin and the x-clamp hook.
Twist the flathead screwdriver clockwise to pry the bottom edge of the x-clamp out of the groove in the heat sink pin.
If you have trouble, try using a larger flathead screwdriver.
As you twist, the x-clamp should pop off the heat sink pin. If not, try repeating the previous step before attempting this one again.

クリエイティブコモンズのオープンソース著作権のもと、あなたの投稿は著作権の対象となります。