メインコンテンツにスキップ

Google Pixel 4a 5G スクリーンの交換

注意:あなたはさきほど閲覧しているガイドの前提となるページを編集しています。あなたが行った変更は、この手順を含むガイド全体に影響を与えます。

英語
日本語

手順 14を翻訳中

手順14
Google Pixel 4a 5G Screen Replacement: 手順 0、 2の画像 1 Google Pixel 4a 5G Screen Replacement: 手順 0、 2の画像 2
  • Use the tip of a spudger to pry up and disconnect the screen flex cable.

  • To re-attach press connectors like this one, carefully align and press down on one side until it clicks into place, then repeat on the other side. Do not press down on the middle. If the connector is misaligned, the pins can bend, causing permanent damage.

スパッジャーの先端を使って、スクリーンのフレックスケーブルをこじ開けて、接続を外します。

このようなプレスコネクタを再装着する際は、慎重に位置合わせしてカチッと所定の位置に収まるまで片側を押し下げてから、反対側で同じ作業を繰り返します。 中央部分を押さないでください。 コネクタの位置がずれていると、ピンが曲がって永久的な損傷を引き起こす可能性があります。

クリエイティブコモンズのオープンソース著作権のもと、あなたの投稿は著作権の対象となります