メインコンテンツにスキップ

Procedura di apertura iPhone 12 mini

注意:あなたは必要条件ガイドを編集しています。あなたが行なう変更は、この手順を含む全ての8個のガイドに反映されます。

英語
イタリア語

手順 6を翻訳中

手順6
iPhone 12 mini Opening Procedure, Apply a suction handle: 手順 0、 2の画像 1 iPhone 12 mini Opening Procedure, Apply a suction handle: 手順 0、 2の画像 2
Apply a suction handle
  • If you're using a single suction handle, apply it to the bottom edge of the phone, as close to the edge as possible.

  • If your display is badly cracked, covering it with a layer of clear packing tape may allow the suction cup to adhere. Alternatively, very strong tape may be used instead of the suction cup. If all else fails, you can superglue the suction cup to the broken screen.

Se stai usando una ventosa, falla aderire al bordo inferiore dello schermo, il più vicino possibile al bordo stesso.

Se il tuo schermo è crepato, coprirlo con del nastro adesivo trasparente da pacchi può aiutare la ventosa a fare presa. In alternativa puoi usare del nastro resistente al posto della ventosa. Se hai ancora problemi, puoi usare della supercolla (cianoacrilica) per incollare la ventosa al vetro.

クリエイティブコモンズのオープンソース著作権のもと、あなたの投稿は著作権の対象となります