メインコンテンツにスキップ

PlayStation 2 obere Abdeckung tauschen

注意:あなたは必要条件ガイドを編集しています。あなたが行なう変更は、この手順を含む全ての5個のガイドに反映されます。

英語
ドイツ語

手順 4を翻訳中

手順4
PlayStation 2 Top Cover Replacement: 手順 0、 2の画像 1 PlayStation 2 Top Cover Replacement: 手順 0、 2の画像 2
  • Flip the PlayStation 2 back to its original upside position.

  • Lift the top cover off the bottom case.

  • To facilitate the removal, it is recommended to pry open the half closer to the power switch first while rocking the top cover towards the front of the bottom case.

  • Carefully remove the power cord that attaches the top and bottom halves by disconnecting the power cord assembly from the top case.

Lege die PlayStation 2 wieder aufrecht vor dich.

Hebe die obere Abdeckung vom Gehäuseunterteil ab.

Du kannst dir das Abnehmen erleichtern, wenn du zuerst die Hälfte in der Nähe des Netzschalters aufhebelst und gleichzeitig die obere Abdeckung in Richtung Vorderseite des Gehäuseunterteils ruckelst.

Die Netzanschlussleitung ist an der oberen und unteren Gehäusehälfte angebracht. Entferne behutsam die komplette Netzanschlusseinheit vom Gehäuseoberteil.

クリエイティブコモンズのオープンソース著作権のもと、あなたの投稿は著作権の対象となります