iMac Intel 27" 2012-2015 Adhesive Strips Replacement

英語

韓国語

手順 3を翻訳中

手順3

Remove the old adhesive

Before you install new adhesive strips, remove all of the old adhesive from the perimeter of the rear enclosure.
If you are re-using your existing display, you must also remove the old adhesive from the back of the display.
Peel off the adhesive strips using tweezers or your fingers. Start at the bottom and peel upward towards the top of the device.
After all the old adhesive is removed, carefully clean the surface with 90% (or greater) isopropyl alcohol and a lint-free cloth. Wipe in one direction, not back and forth.
Don't skip this step, or your new adhesive strips may not bond properly, and the display may fall out of your iMac.

クリエイティブコモンズのオープンソース著作権のもと、あなたの投稿は著作権の対象となります。