メインコンテンツにスキップ

iMac Intel 27インチ 2012-2019 接着ストリップの交換

注意:あなたはさきほど閲覧しているガイドの前提となるページを編集しています。あなたが行った変更は、この手順を含むガイド全体に影響を与えます。

英語
日本語

手順 8を翻訳中

手順8
iMac Intel 27" 2012-2019 Adhesive Strips Replacement: 手順 0、 3の画像 1 iMac Intel 27" 2012-2019 Adhesive Strips Replacement: 手順 0、 3の画像 2 iMac Intel 27" 2012-2019 Adhesive Strips Replacement: 手順 0、 3の画像 3
  • Once you're satisfied that the top half of the adhesive strip is neatly aligned, peel longer blue piece of backing out from behind the strip.

  • If the top half isn't aligned properly, you can carefully peel it up and re-stick it before peeling off the lower backing strip. Be sure to use the spudger tip to anchor the top.

接着ストリップの上半分がきちんと揃っていることを確認したら、ストリップ背面から青色の長い裏張りを剥がします。

上半分がきちんと位置合わせできていない場合は、ストリップの裏張りを剥がす前に、慎重に剥がして貼り直してください。 必ずスパッジャーの先端を使用して上部を固定しながら作業を進めてください。

クリエイティブコモンズのオープンソース著作権のもと、あなたの投稿は著作権の対象となります