メインコンテンツにスキップ

iMac Intel 27インチ 2012-2019 接着ストリップの交換

注意:あなたは必要条件ガイドを編集しています。あなたが行なう変更は、この手順を含む全ての4個のガイドに反映されます。

英語
日本語

手順 7を翻訳中

手順7
iMac Intel 27" 2012-2019 Adhesive Strips Replacement: 手順 0、 3の画像 1 iMac Intel 27" 2012-2019 Adhesive Strips Replacement: 手順 0、 3の画像 2 iMac Intel 27" 2012-2019 Adhesive Strips Replacement: 手順 0、 3の画像 3
  • With the spudger still poking through the hole in the adhesive strip, push the spudger tip into the corresponding hole in the frame of the iMac.

  • Using the hole and spudger to anchor the position of the adhesive strip, line the strip up against the right edge, gently pull down against the spudger to ensure the strip is taut, and stick it onto the frame.

スパッジャーが接着ストリップのホールに差し込んだままの状態で、このスパッジャーの先端を、iMacフレームの合わさるホールに押し込みます。

ホールとスパッジャーで接着ストリップの位置を固定し、ストリップの端をフレーム右端に合わせ、ゆっくりと引き下ろしてストリップをぴんと張ります。それからフレームに貼り付けます。

クリエイティブコモンズのオープンソース著作権のもと、あなたの投稿は著作権の対象となります